We offer a wide range of RF Amplifiers and Generators from T&C Power Conversion.
T&C Power Conversion is a worldwide recognized supplier of industrial solid state RF Power Systems, producing a range of models that cover a broad spectrum of RF applications. With power outputs from a few watts up to greater than 4 kilowatts and frequencies ranging from less than 10 kHz to more than 1 GHz, T&C has the solution to many RF power applications. Our amplifiers and generators are ideal for applications in Ultrasonics, MRI and NMR, Spectroscopy, broadcast communications, EMC testing, thin film deposition, CVD, PVD, gas plasma generation and general laboratory use.
|
 T&C Amplifiers are suited to perform in both industrial and medical applications. The AG1006, AG1015, AG1017L, AG1016, AG1012, AG1024 are broadband examples of generators that are made specifically for these applications. Some transducers need special matching circuits to compensate for piezoelectric impedance characteristics and we can assist in providing these type networks along with the generators. Special generator features: Variable pulsing, Impedance variability, Phase matching to a common signal, Frequency sweeping, Metering for load tuning |
||||||
|
Model |
Frequency range |
Rated output power |
Saturated output power |
Gain |
Data sheet |
|
|
AG 1020 |
0.01 to 14 MHz |
50 W |
175 W |
52 dB ± 1 dB |
|
|
|
AG 1021 |
0.01 to 14 MHz |
100 W |
300 W |
53 dB ± 1 dB |
|
|
|
AG 1017 L |
0.01 to 10 MHz |
200 W |
500 W |
53 dB ± 1 dB |
|
|
|
AG 1015 |
0.01 to 6 MHz |
400 W |
1000 W |
60 dB ± 1.5 dB |
|
|
|
 Ultrasonic frequencies extend from the lower kHz region up to several MHz and cover the following applications: Ultrasonic cleaning, Non-destructive testing, Ferro-magnetic testing, Driving ultrasonic transducers, Air pollution control |
||||||
|
|
||||||
|
Model |
Frequency range |
Rated output power |
Saturated output power |
Gain |
Data sheet |
|
|
AG 1006 |
0.02 to 14 MHz |
200 W |
300 W |
55 dB ± 1.5 dB |
|
|
|
AG 1010 |
20 kHz to 1.2 MHz |
600 W |
1000 W |
60 dB ± 1.5 dB |
|
|
|
AG 1014 |
20 kHz to 2 MHz |
400 W |
550 W |
57 dB ± 1.5 dB |
|
|
|
AG 1016 |
0.02 to 6 MHz |
400 W |
600 W |
57 dB ± 1.5 dB |
|
|
|
AG 1012 |
0.02 to 6 MHz |
600 W |
1000 W |
60 dB ± 1.5 dB |
|
|
|
AG 1024 |
0.02 to 1 MHz |
1800 W |
2000 W |
63 dB ± 1.5 dB |
|
|
|
AG 1048 |
0.02 to 1 MHz |
3600 W |
4000 W |
66 dB ± 1.5 dB |
|
|
|
Among the many applications of this unit are the ability to create electrodeless plasma discharges in vacuum chambers, drive high impedance loads and dielectric breakdown testing. |
||||||
|
|
||||||
|
Model |
Frequency range |
Rated output power |
Peak voltage |
Output impedance |
Data sheet |
|
|
AG0201HV |
100 to 500 kHz |
150 W |
16 kV p-p |
optimized for 200 kOhm |
|
|
|
AG0201HV-XS |
375 kHz ± 50 kHz |
120 W |
12 kV p-p |
designed for best power transfer into high impedance loads |
|
|
|
 These are simple, broadband types that are used for OEM inclusion in other manufacturers products, general laboratory use, communication, RFI/EMI Ultrasonics and a myriad of other common applications. Linear, Broadband, Reliable, Cost Effective, Basic Convenience, Up to 1 GHz, Up to 300W, Moduls and table top amplifiers. |
||||||
|
|
||||||
|
Model |
Frequency range |
Rated output power |
Saturated output power |
Gain |
Data sheet |
|
|
LA-5 |
0.05 to 900 MHz |
5 W |
10 W |
33 dB ± 1.5 dB |
|
|
|
LA-10 |
3 to 1000 MHz |
10 W |
15 W |
40 dB ± 1.5 dB |
|
|
|
LA-25 |
0.5 to 500 MHz |
25 W |
50 W |
44 dB ± 1 dB |
|
|
|
LA-50 |
15 to 110 MHz |
50 W |
70 W |
47 dB ± 1 dB |
|
|
|
LA-50HF |
1 to 50 MHz |
50 W |
70 W |
50 dB ± 1 dB |
|
|
|
LA-100L |
500 kHz to 350 MHz |
100 W |
150 W |
51 dB ± 1,5 dB |
|
|
|
In a power delivering system where the source and load impedance differs by more than 2:1, a matching element can improve efficiency. T&C offers a range of LF Band matching transformers for high and low impedance load applications. |
||||||
|
|
||||||
|
Model |
Input impedance |
Output impedance |
Impedance ratio |
Rated power |
Data sheet |
|
|
SUT02LF |
50 Ohm |
200, 450, 800, 1250 Ohm |
1:4, 1:9, 1:16, 1:25 |
100 W |
|
|
|
SUT01LF-5A |
50 Ohm |
200, 450, 800, 1250, 1800 Ohm |
1:4, 1:9, 1:16, 1:25, 1:36 |
100 W |
|
|
|
SUT01LF-4 |
50 Ohm |
200, 450, 800, 1250 Ohm |
1:4, 1:9, 1:16, 1:25 |
100 W |
|
|
|
|
|
|
||
|
|
Broadband Amplifiers |
|
||
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
|
|
|
|
||
|
|
|
|||
|
|
|
|
||
|
|
|
|
||
|
|
|
 |
 |
 |
 |
 |
 |